Here's a few pics of the cab in primer, and where it'll stay while I work on the fenders, inner fenders, doors, and core support.
This is another part of the gap repair, I added a strip of 14 gauge in to get it even tighter.
Over the weekend I worked on stripping this drivers fender down and treated it inside and out with Fast Etch and Pre from Eastwood. Going to work on the other side then get these in primer. Sure wish I had the budget for sandblasting, THIS was ALOT of work... but a labor of love. I wanted to get it all to bare metal so my paint job don't look like the paint Im stripping off. Adhesion problems galore!
Couldn't resist laying some emblems on it. Love that brushed metal look. :-)