Quote:
Originally Posted by legendman
I am using a 88-91 Burb/K5 radiator support so I just used the tabs on the intercooler and drilled some holes for a couple bolts.
|
I am using the same core support as you but where my tabs on the intercooler were it was going to be a very tight fit to put a bolt in there and have it so that you wouldnt have to pull a head light every time you needed to pull the intercooler.
This is how I went about bolting the intercooler in. Just made a bracket and welded a nut behind it so I wouldnt have to hold the nut.
Sense I cut out the main supports I also needed to replace them so I went and picked up some 1"x2"x 11 ga to build new supports.
I have not welded the supports in yet, but in this picture you can see the intercooler and radiator all bolted up and see where I plan on putting the supports.