[Dinos63]

thanks dudes! this is my busy time at my appliance shop so sorry on the delays . Got the frame back from the blaster and the frame was in need of a lot of repair. The power steering box had cracked the frame really bad and l since the frame had been stretched twice once by the stageway folks when the crewcab was built and then again when it got back half with like a 74-78 3/4 long bed section . Joe got after the repairs on the steering box and notched the frame for all the steering. the cross members already been pancaked 2" nate made me a one off set of 2" longer upper and lower relocated arms (killer job).we left the old front end on with few bolts so we could keep the chassi rolling . Joe has been fixing the all the sections by beefing them up with some big channel on the inside of the frame and that's been a ton of work . We l are going with trailing arms on the rear using nate's rear cross member and hope to start on the bridge Thursday.