The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - Edelbrock help or-

farmero · 07-25-2013, 09:01 PM

The stumble is in all gears and is just off idle, goes away after it get the rpms up. If I lug it in high gear then it will stumble also. Have been considering a new distributor as this is the old original one. I have the timing mark problem that has been discussed here on another thread. "Can't See the Timing Mark". I have done many dist installations before but there is always a first. OK on the edit.

07-25-2013, 09:01 PM	#3
farmero Registered User Join Date: Jun 2013 Location: Allentown Pa. Posts: 36	Re: Edelbrock help or- The stumble is in all gears and is just off idle, goes away after it get the rpms up. If I lug it in high gear then it will stumble also. Have been considering a new distributor as this is the old original one. I have the timing mark problem that has been discussed here on another thread. "Can't See the Timing Mark". I have done many dist installations before but there is always a first. OK on the edit.