[Zeke's Garage]

Originally Posted by utee05

I have not really had any hot start problems, just figured it would be easier to have the remote starter up closer to the engine bay. I'll re-wire everything back to the way it was. The starter has just been replaced so I know that it is in working order. Also the battery and alternator are fine as well.

If you're just looking for an option for a 'remote start' in the engine bay, you can mount a momentary switch on the firewall or inner fender that connects to the hot (battery side) and the solenoid (where the purple wire goes) directly to the starter solenoid. I did this on my Corvette while working with tuning issues, since it was easier to 'bump' the engine over under the hood instead of gyrating around the steering column through the window to do it.

Good luck!

Shawn