The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - What do i need to do to put a cd player in my 68?

Andy4639 · 08-16-2013, 07:46 PM

Checkout Cruitchfield if anybody has it they will.
On our old trucks all it was was a hot and ground with speaker wires.
New radio's have constant hot for the memory a switched hot and ground then speaker wires. Blue will be for a electric anntena are for a amp.
U could go to radio shack and buy a multi connector for all of it and solder it all together if u wanted to.

08-16-2013, 07:46 PM	#6
Andy4639 Old member Join Date: Jan 2002 Location: Liberty, & Garden City S.C. , U.S. Posts: 19,936	Re: What do i need to do to put a cd player in my 68? Checkout Cruitchfield if anybody has it they will. On our old trucks all it was was a hot and ground with speaker wires. New radio's have constant hot for the memory a switched hot and ground then speaker wires. Blue will be for a electric anntena are for a amp. U could go to radio shack and buy a multi connector for all of it and solder it all together if u wanted to. __________________ 1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs.