The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - She won't fire up. Please help me! I"m at a complete loss!

jorgensensc · 09-07-2013, 02:55 PM

I think the problem with uploading the parameters for the escalade is that the operating system for the '08 is different than the operating system for the '11. Since we are using a '11 ECM (due to '11transmission) he was having to manually enter all of the tables in (cut and paste) the ECM. I am wondering if he missed something. Do you think I could just upload a '11 escalade program, and adjust that accordingly? My engine is not flex fuel like the '11 are, so I know some things like injectors will need to be changed, but it might be a cleaner way to start vs changing tables on the 4.8 tables that are already on the ECM. Thoughts?
Posted via Mobile Device

09-07-2013, 02:55 PM	#82
jorgensensc Registered User Join Date: Jul 2003 Location: Cypress, Tx Posts: 4,005	Re: She won't fire up. Please help me! I"m at a complete loss! I think the problem with uploading the parameters for the escalade is that the operating system for the '08 is different than the operating system for the '11. Since we are using a '11 ECM (due to '11transmission) he was having to manually enter all of the tables in (cut and paste) the ECM. I am wondering if he missed something. Do you think I could just upload a '11 escalade program, and adjust that accordingly? My engine is not flex fuel like the '11 are, so I know some things like injectors will need to be changed, but it might be a cleaner way to start vs changing tables on the 4.8 tables that are already on the ECM. Thoughts? Posted via Mobile Device __________________ 1972 C20 Suburban- Big Blue Betty '56 Chevy Bel Air Sedan- Frame up Restoration -What would you attempt to achieve if you knew you could not fail?- -I Refuse To Tiptoe Through Life, Only To Arrive Safely At Death's Door- R.I.P. EAST SIDE LOW LIFE