Quote:
Originally Posted by midniteblues
i've read thead threads too (soon ready too tackle the doors)an i was hopeing for more info also.
|
I believe there are somne good YouTube videos out there on rebuilding the vent windows.
I made a steel bar that fits tight in the division bar channel.
This helps hold the vent window assembly in my vice.
I also bought a special rivet tool from a corvette site.
http://www.zip-corvette.com/ProductD...ero-Rivet+Tool
Works very very nice at compressing these rivits.
So much easier that a hammer and punch.
The special rivit tool make this job do-able for 1 person.
But is still easier with a second set of hands.