[gmachinz]

The only things I've done is strip the interior, begin filling misc. holes in and grinding them down, adding metal below the windshield to fix a hideous antenna mount the PO put in, found a scabbed up rocker panel weld seam where the former guy lazily patched it in-gotta fix that, too. Eventually, the truck will be black with black/grey interior. I stripped down the front end sheetmetal, too. AS of right now, I seam-sealed the interior and applied 3 coats of some bedliner to the floor. I've got about 6 hours into it so far....that's going from backing it in the garage to what you see now. Next up is to rebuild the AC enclosure, pull the windshield, smoothout the door jambs and make a few patch panels for the lower cowl area on the RH side.