The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

**jocko** · 09-21-2013, 12:59 AM

that is how mine is also, that's why I was curious - the LMC catalog sells ALL the clip types, but their diagram showed using ONLY the plastic clip types, exclusively, along the upper belt molding (i.e. no metal clips on the ends).

I can't really get behind the forward upper belt clip (can BARELY get to the rear-most one via the tail light opening, ha!) so will have to look at how I put these on. I suppose I could use ALL plastic adhesive clips. This is semi-temporary, hoping to restore the truck completely someday, but in the meantime, needed to replace a bent piece of side trim. Thanks again for all the help and confirming factory config for the different years.

09-21-2013, 12:59 AM	#8
jocko Senior Member Join Date: Oct 2009 Location: Godley, TX Posts: 17,937	Re: upper trim attachment options that is how mine is also, that's why I was curious - the LMC catalog sells ALL the clip types, but their diagram showed using ONLY the plastic clip types, exclusively, along the upper belt molding (i.e. no metal clips on the ends). I can't really get behind the forward upper belt clip (can BARELY get to the rear-most one via the tail light opening, ha!) so will have to look at how I put these on. I suppose I could use ALL plastic adhesive clips. This is semi-temporary, hoping to restore the truck completely someday, but in the meantime, needed to replace a bent piece of side trim. Thanks again for all the help and confirming factory config for the different years.