[jpnh]

Then i blew the place out with the air, i ended up wet sanding using a spray bottle and a sanding block/320 grit. gotta try n use a sanding block on the bigger areas but some things you have to sand with just the paper then i cleaned the cab real good with clean rags/glass cleaner a few times changing the rags to new ones every time.then i sprayed the cab with epoxy primer.it took skimmn it again with the polyester glazing compound sanding it with 180grit and successive coats of primer with wet sanding 320 grit in between to make the coats from the scoop finally dissapear gotta feather the edges and keep m thin.-jeff