The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

**kwmech** · 10-11-2013, 03:48 PM

Leave the flywheel on the engine. The clutch may even be the same. The input spline on both the 465 and the 4500 are the same. The master should work just fine with the different slave cyl. If you want to be sure of the hydraulics, go to the parts store and check the difference on the piston size. The parts monkeys should have specs on them

10-11-2013, 03:48 PM	#2
kwmech Senior Member Join Date: Mar 2003 Location: Colfax-California Posts: 8,407	Re: nv4500 swap Leave the flywheel on the engine. The clutch may even be the same. The input spline on both the 465 and the 4500 are the same. The master should work just fine with the different slave cyl. If you want to be sure of the hydraulics, go to the parts store and check the difference on the piston size. The parts monkeys should have specs on them