That would be awesome!
Here are a few shots of the installation for others to see how things look. I am using the Eldorado brake pads and they fit just fine.
First bracket that fits flush to the inside of the 4 bolt mounting flange
Shot of the brackets installed, the large thick bracket has a recess on one side that should face the backside of the axle. This is to allow the caliper piston area clearance.
A couple of shots with the calipers on, and one from the top down to show where it sits in relation to the axle.
Side view
Front view
Top view
Also, the wheels are stock Rallye 15x8 and they have plenty of clearance all around..