The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

familyfast64 · 10-15-2013, 04:57 PM

I'm posting again, at least I think I already posted, because I've learned more about what is actually under it since the trade...

Drop spindles -2.5" cheap single piston...I think 75 mm, stops alright tho.
Drop springs? Still unsure but the front cross member is only about 3.5-4 inches from the ground.
9" ford rear end with leaf springs under Axel tubes
Air shocks with the upper mount relocated(not enough imo)
There's prolly 2"-3.5" depending on psi in air shock between Axle tube and frame. Also the same distance between to of rear end housing and floor. If the shocks are empty or low it'll bottom out but it does good when there's a lil psi added. She does lean to the back passenger side a lil, I'm assuming it's just worn leaf springs..?..
Anyway, I want to get seat belts, then some good sway bars for sure.

10-15-2013, 04:57 PM	#232
familyfast64 Registered User Join Date: Sep 2013 Location: Cheney, Kansas Posts: 337	Re: Post Pics of your Static Drops!! I'm posting again, at least I think I already posted, because I've learned more about what is actually under it since the trade... Drop spindles -2.5" cheap single piston...I think 75 mm, stops alright tho. Drop springs? Still unsure but the front cross member is only about 3.5-4 inches from the ground. 9" ford rear end with leaf springs under Axel tubes Air shocks with the upper mount relocated(not enough imo) There's prolly 2"-3.5" depending on psi in air shock between Axle tube and frame. Also the same distance between to of rear end housing and floor. If the shocks are empty or low it'll bottom out but it does good when there's a lil psi added. She does lean to the back passenger side a lil, I'm assuming it's just worn leaf springs..?.. Anyway, I want to get seat belts, then some good sway bars for sure. Attached Images __________________ Live and let live Last edited by familyfast64; 10-15-2013 at 05:03 PM.