|
Re: Project 30 years sitting
ok, so back to the garage.
We had been debating on moving the engine forward since the 4l60e is longer then the th350 I removed. So we test fitted the core support, rad, shroud, and put the drivers fender on to keep the core square. We decided to go forward with moving the engine.
So we jacked engine up, removed my cross member, drilled the upper holes. Marked lowers with paint stick, then torched them. Ended up moving it the pass side a hair by accident. But engine is back in, all pullys and belt on. New blower box from teeitup cleaned and installed. Also got my throttle peddle working using the 95 Yukon cable and my 72 peddle. Heated it up, bent it a little. Then cut slit into the eyelit.
|