Thread
:
86 Silverado K20 12V CUMMINS Build
View Single Post
11-03-2013, 05:31 PM
#
83
brimc
Registered User
Join Date: Jun 2013
Location: New Lowell, Ontario, Canada
Posts: 248
Re: 86 Silverado K20 12V CUMMINS Build
Thanks Guys !!
Today I got the rad support mounted on the frame.
It really should have had a 2nd coat of paint but I ran out. Then I got the IC mounted using factory hold downs.
One thing I was really going for was to be able to replace hoses and belts with OEM parts off the shelf. This one made me feel good after confirming that it will work. IC boots and rad hoses fit perfect. I had to cut about an inch off one end of each IC tubes and will need 1 inch taken out of the rad hoses due to the engine being closer to the rad compared to the old Dodge.
Little by little. Sure wish time went as slow at home as it does a work !!
__________________
BRIAN
1986 Chevrolet K20 Silverado 12 Valve CUMMINS P Pumped Intercooled/Getrag360/Divorced NP205/10B/14BFF Detroit Locker - DD Canadian Winter Beater.
My Chevrolet
CUMMINS
Build
http://67-72chevytrucks.com/vboard/s...d.php?t=585509
brimc
View Public Profile
Find More Posts by brimc