The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

Clarance J · 11-12-2013, 03:26 PM

yossarian19. Here's my exhaust that cost less than 200.00. You have to fab it and so I know that means welding. I bought my gas mig welder awhile back that I paid close to 400.00. Its only 85 amp but welds everything I need to weld. The exhaust kit I ordered from Summit Racing. 67-81 Camaro for 189.00. There's enough tubing in the kit to take it all the way out the back. I did it with my truck on jack stands. If you like fabbing and crawling around your garage floor under your truck then maybe you can get your exhaust and a welder too. Just food for thought. Good luck on anyway you decide to go.

Earl aka Clarance J.

11-12-2013, 03:26 PM	#152
Clarance J Registered User Join Date: Feb 2013 Location: Grants Pass Oregon Posts: 473	Re: Project: Over My Head yossarian19. Here's my exhaust that cost less than 200.00. You have to fab it and so I know that means welding. I bought my gas mig welder awhile back that I paid close to 400.00. Its only 85 amp but welds everything I need to weld. The exhaust kit I ordered from Summit Racing. 67-81 Camaro for 189.00. There's enough tubing in the kit to take it all the way out the back. I did it with my truck on jack stands. If you like fabbing and crawling around your garage floor under your truck then maybe you can get your exhaust and a welder too. Just food for thought. Good luck on anyway you decide to go. Earl aka Clarance J. Attached Images __________________ You have to have patiences or you'll be one.