[Vic1947]

Finished welding out the patch for the speaker grille. Took a long time to stitch it together, but still had to use pins to pull out a few low places and the hammer and dolly in others. Makes me wonder how the long welds on the bed will go. No use fretting over it, will cross that bridge when I come to it. Used the Dremel tool to cut out an opening for the center A/C outlet. The plastic duct that fastens to the back of it is resting on the top of the stereo bracket. If the stereo opening was 1/8" higher, I'd be hosed. Sometimes it's better to be lucky than good.