The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

Sammy · 11-16-2013, 08:25 AM

Heater Core tips I use. Use a 2X4 or 4X4 block to secure the passenger side of the hood. Then remove the hood hinge on that side. Then remove the bolts securing the inner fender on that side allowing it to drop far enough to get to the lower bolts on the cover holding the heater core. Might even consider removing that wheel for more room if needed. The rest of the process is straight forward.

11-16-2013, 08:25 AM	#5
Sammy Registered User Join Date: Apr 2000 Location: Bonne Terre, Mo Posts: 3,005	Re: Got my Cheyenne Home! Heater Core tips I use. Use a 2X4 or 4X4 block to secure the passenger side of the hood. Then remove the hood hinge on that side. Then remove the bolts securing the inner fender on that side allowing it to drop far enough to get to the lower bolts on the cover holding the heater core. Might even consider removing that wheel for more room if needed. The rest of the process is straight forward. __________________ '69 Chevy Long Fleet & '71 GMC Short Step & Project "ODD BALL" "You can wash a pig, soak it in most expensive perfume. In the end it is still just a pig." ODD BALL build thread http://67-72chevytrucks.com/vboard/s...d.php?t=478629"