1954 3100 C4 Tube Chassis Build
Here is my current project. Its a 54 3100 I picked up from a friend of mine chev3600. The frame was hacked and I couldnt find a decent replacement local and wasnt 100% settled on the S10 swap so I decided to build a square tube chassis to mount my C4 IFS and IRS to. I took about 1000 measurements and wrote everything down to use while duplicating the chassis. I dont have a frame table or anything so it has taken longer than I wanted it to but has turned out good so far. It is totally square and level so far within 1/32 of an inch. WELL within spec. Anyway here are some pics of where I am so far.
|