[Molberg]

The next step was to make something for behind the seats. Thought I'd take a shot at a stretched resin type panel. I used 1/8" x 6" grid type concrete mesh for the base frame. In and out numerous times to get it to fit nice.(cut and tack weld... try fit again) Positioned wood discs for the speakers and amp mount and supported from underside with left over pieces of concrete mesh. Laid it down on a sheet of plywood covered in poly, and found a stretchy type flannel blanket. Stretched over speaker discs and fastened to plywood around edges. Rolled the entire thing with fiberglass resin.