|
Re: 47 Step van
itstheshu, if you are thinking about putting it on a regular truck it will be a little too wide. The box truck is wider than a regular truck. But here is how I did it. There was about 3/4 on an inch on each side of the frame and crossmember, so I has some plates burnt out and used them as spacers and welded them too the frame. Then bolted through the crossmember, spacers and the frame. I also had to make spacers for the box and the idler arm. The AD frame was about 1 1/2 inches narrower than the 87 c10 frame.
Shannon
|