Re: New project
Went solid roller . With the Vortec block you can use a LT1 /vortec style blank and use the retainer plate to hold the cam thrust instead of a button . Comp built me a custom grind 256/266 @.050 .701/.707 with 1.6's on 108 . Heads are AFR 220 with the comp port job and the are 328 at .600 and 329 at .650 and .329 at .700 so really no need to use 1.6's . Pump gas 10.75 to 1 small block . Having Dan Divinci build me a carb for this motor .
We are just going to dyno the motor then bolt it in the truck and see what happens . Should be interesting . The goal is to be making passes by mid January . First race of the season NHRA is Febuary 17/18
|