The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

Andy4639 · 01-23-2014, 12:26 AM

Well here is how I did mine. It's not exactly want you have really asked for but you can do the same thing. This works great in mine.

I bought a 93 Suburban tank for TBI back several years ago, I pulled the sendor out and installed the 305 TPI pump in it. Now I plan to install the LSx pump in it. So far though the old pump is meeting the 58lbs of pressure required so it maybe awhile before I do it. I will perform this before the Power Tour for sure just for good insurance it want go out on the tour.

01-23-2014, 12:26 AM	#2
Andy4639 Old member Join Date: Jan 2002 Location: Liberty, & Garden City S.C. , U.S. Posts: 19,936	Re: '87 tank/fuel pump supplier Well here is how I did mine. It's not exactly want you have really asked for but you can do the same thing. This works great in mine. I bought a 93 Suburban tank for TBI back several years ago, I pulled the sendor out and installed the 305 TPI pump in it. Now I plan to install the LSx pump in it. So far though the old pump is meeting the 58lbs of pressure required so it maybe awhile before I do it. I will perform this before the Power Tour for sure just for good insurance it want go out on the tour. __________________ 1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs.