The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

**seafoam68** · 02-07-2014, 08:06 PM

Hey, sorry I'M just getting back to you. Measured my bed today. All are from the outermost edges of the inside at the floor level. Starting at the front it is 72 inches across. Down the sides is 75.5 inches from front corner to rear corner then steps out across bed for 3.5 inches then back towards rear for 3 inches then across bed (under tailgate) for 65 inches. Hope that's not too confusing. I have custom widened wheel tubs, so I couldn't really give you that measurement but maybe someone else can chime in with it. Good luck.

02-07-2014, 08:06 PM	#6
seafoam68 Senior Member Join Date: Oct 2009 Location: Chattanooga, TN Posts: 259	Re: Bed Floor Questions Hey, sorry I'M just getting back to you. Measured my bed today. All are from the outermost edges of the inside at the floor level. Starting at the front it is 72 inches across. Down the sides is 75.5 inches from front corner to rear corner then steps out across bed for 3.5 inches then back towards rear for 3 inches then across bed (under tailgate) for 65 inches. Hope that's not too confusing. I have custom widened wheel tubs, so I couldn't really give you that measurement but maybe someone else can chime in with it. Good luck.