OHHHH Ok 99 to life. Now I get it. I mocked up all the sheet metal a couple years ago. I cut the Radiator support to the height I needed and welded in a new bottom cross piece anticipating that I would run some kind of 19 X 21 radiator. All I was showing in my recent video is what I did to fit the radiator to the support. In the previous video I did regarding the radiator support. I showed the old radiator and original support together, but I just had the two haves of the support laying on the floor with the radiator laying on top. It did look like everything was fully in tact so that may have led you to believe that I only cut it down in my last video with no sheet metal mocked up. Here is the video I made of the mock up. It was my first ever YouTube Video.
I Guess I didn't actually get a pic of the radiator support in place when I made the video but the fenders were bolted in place using it.