The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

STOCKISH · 02-23-2014, 03:33 PM

Thanks man, I have about $38 invested in the entire thing. The 1/4 wall I made the crossmember out of and the 1/2 I used for the upper control arm mounts I had laying around for years. The only thing I purchased was the 1/4 wall DOM for the lower mounts. Sure beats Flat Outs $1000 price tag. Sure was more work (lots more) but more rewarding as well. Cant wait to redo the back now and make it a full roller.

02-23-2014, 03:33 PM	#123
STOCKISH Formerly- 1972SuperCheyenne Join Date: Oct 2008 Location: Wake Forest NC Posts: 5,782	Re: 1954 3100 C4 Tube Chassis Build Thanks man, I have about $38 invested in the entire thing. The 1/4 wall I made the crossmember out of and the 1/2 I used for the upper control arm mounts I had laying around for years. The only thing I purchased was the 1/4 wall DOM for the lower mounts. Sure beats Flat Outs $1000 price tag. Sure was more work (lots more) but more rewarding as well. Cant wait to redo the back now and make it a full roller. __________________ --Josh My Build Thread:http://67-72chevytrucks.com/vboard/s...d.php?t=799218 A good crossthread is better than Loctite any day. Life is not about what you have, but who you have to share it with.