The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - Removing front springs on 1968 Chevy C10 with drums

msgdsrf · 03-13-2014, 10:21 AM

Not sure it was stated, but you want to go at the top joint not the bottom. And do as the other wrote. Hitting the spindle while it is preassured from the spring will pop it loose. Then just control the release with a jack below the bottom a arm. Be sure to have the truck good and high, you'll need some room.

03-13-2014, 10:21 AM	#10
msgdsrf Registered User Join Date: Jul 2012 Location: White Salmon, WA Posts: 263	Re: Removing front springs on 1968 Chevy C10 with drums Not sure it was stated, but you want to go at the top joint not the bottom. And do as the other wrote. Hitting the spindle while it is preassured from the spring will pop it loose. Then just control the release with a jack below the bottom a arm. Be sure to have the truck good and high, you'll need some room.