The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - Removing front springs on 1968 Chevy C10 with drums

NEWBIEC10 · 03-13-2014, 10:35 AM

Ok, thanks for the info. What I'm seeing the back side of the drum is somewhat dished and the end of the A arm is about a 1/4 of an inch from touching the backing of the drum. Since the backing of the drum is not flat and somewhat dished I think it might not clear. I believe that you guys have lots of knowledge and I'm completely new at this trucks. I'll give it a try this weekend and see if it will work. Thanks***

03-13-2014, 10:35 AM	#12
NEWBIEC10 Registered User Join Date: Mar 2014 Location: MTV WA Posts: 62	Re: Removing front springs. PLEASE HELP!!! Ok, thanks for the info. What I'm seeing the back side of the drum is somewhat dished and the end of the A arm is about a 1/4 of an inch from touching the backing of the drum. Since the backing of the drum is not flat and somewhat dished I think it might not clear. I believe that you guys have lots of knowledge and I'm completely new at this trucks. I'll give it a try this weekend and see if it will work. Thanks***