Re: 1972 Chevy p/u NewType Build
Alright so the knowns of issues currently:
Rust/brown coloring in radiator.
Head leak under cylinder 6/8.
Intake leak at back dribbling to trans.
What I plan to attack:
Pull pulley drive system off completely.
Pull motor and drop off with coworker/engine tech for the work of removing the heads/intake and eliminating all leaks.
Have heads Magnafluxed by a local machine shop to be sure they aren't cracked.
Have radiator checked and flushed possibly to see if it can be repaired or If I need to buy a new replacement.
Plans of upgrades:
Pull radiator and begin installing vintage air A/C components since motor is out.
Purchase new GM compressor 96-98 ext cab model.
Purchase overflow tank.
Install MSD ignition box on firewall somewhere with a custom bracket.
Clean/rebuild carb.
Check fitment/clearances for my previously purchased Doug thorley headers (need to have my motor mounts fabbed to allow new headers to fit.
New plug wires for the distributor.
Will add on if anything else needs done but this is the majority of it.
|