[Spblack]

Originally Posted by tbrown5079

Fired it up the other night. It sputtered and stalled twice but then smoothed out and runs. No leaks, but the bad news is no throttle. I've searched for loose wires and bent pins but no luck yet. Hooked up the OBD2 port and check engine light. No codes and the light goes out after it starts. You can rev it up manually but just runs at fast idle on its own. Not recognizing a component somewhere or I'm missing a ground.
Cut, bent and installed the last piece of brakeline so if I had the throttle figured out I could drive it around the block.

sounds like the pedal.