The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - Install Control arm bushings without a press?

**jayoldschool** · 04-19-2014, 08:29 PM

Don't know if it will help, but I just did bushings on a VW with this tool I made for five bucks:

7/16th rod, 1" spacers, washer, nut. Put bushing in place, stack the spacers, put on the washers and nuts, crank, bushing gets pulled in.

04-19-2014, 08:29 PM	#2
jayoldschool Moderator Join Date: Dec 2012 Location: ON, Canada Posts: 2,154	Re: Install Control arm bushings without a press? Don't know if it will help, but I just did bushings on a VW with this tool I made for five bucks: 7/16th rod, 1" spacers, washer, nut. Put bushing in place, stack the spacers, put on the washers and nuts, crank, bushing gets pulled in.