The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - Project Clementine- 1965 GMC 3/4 LWB Long and Low Static Drop

B_Bob · 04-26-2014, 08:58 PM

Unfortunately found some frame damage in the front. I'm not sure what to do about it. It appears to be only from the front crossmember forward, but I don't really want to do a bunch of work to a bent frame. I have a good lead on a 1965 SWB roller. The guy wants 1k for it though. Seems pretty steep, but I could put all my parts on it and then just swap the body and motor over. I'd also have to source a short bed, or have my long cut short. Any thoughts or advice would be very welcome.

04-26-2014, 08:58 PM	#55
B_Bob Registered User Join Date: Oct 2012 Location: Phoenix, AZ Posts: 117	Re: Project Clementine- 1965 GMC 3/4 LWB Long and Low Static Drop Unfortunately found some frame damage in the front. I'm not sure what to do about it. It appears to be only from the front crossmember forward, but I don't really want to do a bunch of work to a bent frame. I have a good lead on a 1965 SWB roller. The guy wants 1k for it though. Seems pretty steep, but I could put all my parts on it and then just swap the body and motor over. I'd also have to source a short bed, or have my long cut short. Any thoughts or advice would be very welcome. Attached Images