Quote:
Originally Posted by 1966burb
The piece between the 2 nuts was a piece of the frame cut out because he could not get it unbolted. Used the "hot wrench" and got the nuts off. Lugnutz65 -- were the nuts tight against each side of the frame rail? The nuts on mine were seized about 3 inches apart. Jim
|
Mine were seized too. One of mine had a large square metal piece among the parts. As I review the photos, I think the metal square on mine was added to the PS assembly so the part with the eyelet would not pass through the keyhole in the end of the horizontal hanger. Thus the owner never needed a padlock.