[screamin_c10]

Finished up the braided stainless fuel lines and temporarily dropped in the sumped tank. Mounted the fuel pump and filters, etc to test fit.

Hung the fiberglass leaf springs and started mocking up the panhard bar and its assorted attaching points. I'm still waiting on Jegs to send the correct slider box(I don't think the zip ties will cut the mustard here). Finished up the heavy duty shackles and installed poly bushings and grade 8 hardware in the frame. Hopefully this will keep the springs happy and properly located.

The new springs dropped the rear end ~2" so the front springs were cut to match. I'm currently modding/rebuilding the UCAs and fabbing up some roller perches to free up any bind remaining in the front end and tp relocate the spring a bit.