The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

OrrieG · 05-11-2014, 08:41 PM

I used 74 axles on my truck and set it up to use a 74 MC with a 9" hotrod booster so the MC bore and capacity would match the brake caliper and rear wheel cylinders. have only test drive it twice around the block but the brakes will put you thru the windshield. From 85 to 2000 I drove it with a manual MC with no issues too.

05-11-2014, 08:41 PM	#2
OrrieG Registered User Join Date: Jun 2006 Location: Idaho Posts: 8,800	Re: Brake master cylinder and booster I used 74 axles on my truck and set it up to use a 74 MC with a 9" hotrod booster so the MC bore and capacity would match the brake caliper and rear wheel cylinders. have only test drive it twice around the block but the brakes will put you thru the windshield. From 85 to 2000 I drove it with a manual MC with no issues too. __________________ 1959 Chevy Short Fleetside w/ 74 4WD drive train (current project) OrrieG Build Thread 1964 Chevelle Malibu w/ 355-350TH (daily driver) Helpful AD and TF Manual Site Old Car Manual Project