So wrapped up lizard skin application yesterday. I ended up doing 2 coats of sound deadener and 2 coats of ceramic insulation. The texture ended up being dimpled and rough to the touch. Here is the finished cab
The color looks grey on the pics, but it is more like dark charcoal.
As some others have reported the ceramic insulation goes a lot further than the sound deadener. It also dries very fast. By the time I got the first coat sprayed I began spraying the second coat. The sound deadener was a different story. It took much longer than the manufacturer said for it to dry and even after letting the last heavy coat sit overnite it was damp in the morning. All in all though seemed to go on easy and turned out as described.
I then turned my attention to rust converting the underneath of the bed.
there was not a ton of rust but bed has been sitting for almost a year in bare metal. I used my paint gun as the corroseal is almost thick like paint. Went on perfect. Here is before and after.
today i will spray the corothane on the underneath of the bed and then raptor the entire underneath of bed. So far so good.