The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

**Wrenchbender Ret** · 07-06-2014, 10:44 AM

If you remove the bracket you can weld the new stud in. The easiest way is use a conventional bolt & nut & lock washer & hold an open end wrench on it when you tighten it.

07-06-2014, 10:44 AM	#2
Wrenchbender Ret Registered User Join Date: Oct 2005 Location: Overland Park, Ks. Posts: 5,194	Re: Upper Control Arm Stud Loose If you remove the bracket you can weld the new stud in. The easiest way is use a conventional bolt & nut & lock washer & hold an open end wrench on it when you tighten it.