The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - Project Reno

**cmabolt** · 07-14-2014, 08:22 AM

Yesterday i was able to get one of the 2 pairs of headers i ordered test fit. It is official, the Doug Thorley 309C manifold replacement headers will work. The frame will need to be clearanced on the drivers side for the flange, but they will bolt up. I am waiting till the Headman LS block huggers come in before making a decision or cutting the frame.
Passengers side no issues

drivers side

While waiting for the headers to come in I began re-assembling some of the cab parts so i know where to route wires. i made a large order to LMC for the rest of my interior as well as nick nacks so i don't get delayed on the re-assembly.

I also finished up on the trans tunnel.

I am going to spray it with Raptor, but first need to figure out how to combine the shift boot retainer rings. It's always something.

07-14-2014, 08:22 AM	#180
cmabolt Registered User Join Date: Nov 2007 Location: baltimore, maryland Posts: 617	Re: Project Reno - 72 cheyenne rebuild Yesterday i was able to get one of the 2 pairs of headers i ordered test fit. It is official, the Doug Thorley 309C manifold replacement headers will work. The frame will need to be clearanced on the drivers side for the flange, but they will bolt up. I am waiting till the Headman LS block huggers come in before making a decision or cutting the frame. Passengers side no issues drivers side While waiting for the headers to come in I began re-assembling some of the cab parts so i know where to route wires. i made a large order to LMC for the rest of my interior as well as nick nacks so i don't get delayed on the re-assembly. I also finished up on the trans tunnel. I am going to spray it with Raptor, but first need to figure out how to combine the shift boot retainer rings. It's always something. __________________ Project Reno Build http://67-72chevytrucks.com/vboard/s...d.php?t=392636 Easier to beg forgiveness than ask permission!