Quote:
Originally Posted by JakeDW
You can use a parallel 4 link with a wats link in the rear that would keep the best pinion angle and keep the wheels centered in the wheel wells.Or a triangulated 4 link would be less work if you do it that way try to make the bars long and about or the same length.
Just wondering if you are going to lay the truck on the frame if you made sure the bottom of the cross was level or higher than the frame.
Cool truck to do.
Jake
|
hey jake!
I will have to take a look at the crossmember.
Sorry for the lack of pics lately, it has been slow. We're down to the bare frame. Right now we are working on the notches, and we have decided on a parallel four link with panhard bar. We figured if we're going to bag it, we might as well put it on the ground.
I have also nailed down a color - velvet green from Volkswagen.
I also finished a really good drawing I hope to turn into a rendering... so get ready! Here's a sneak peek...