Re: 89 S10 4.3 Need help troubleshooting TBI/IAC Idle issue
Please ignore my last post and read this one (ran out of time to edit it)! I had the DVOM set to the wrong setting. Here are the CORRECT readings for both sensors (to see if they agree), both with outside temp of 76 degrees F:
ECT sensor: 3900 ohms
GUAGE sensor: 3670 ohms
The actual readouts were 3.90 and 3.67. I did the conversion to ohms on a scientific calculator by entering the readout value (3.90), then pressing the "Exp" button followed by the "3" button.
Your list of approximate sensor resistance specs says I should get 2796 ohms at 77 degrees F: 2796 ohms @ 77 deg. F. or 25 deg. C.
I'm not sure what this means. Are BOTH sensors bad? Did I do something wrong?
|