Had to work saturday all day and sunday was pretty busy.
Starting mocking things up though.
Seems I need to either cut the existing 01 nylon lines or use a heat gun to bend them in the other direction. Thoughts?
Also the tbi lines went all the way up to rear of the ls engine. So all I will have to do is cut, double flare and attach the ends of the 01 lines that attach to fuel rails using some unions.
The rear going to the pump assy looks like it may need some more thought.
TBI lines come within about 18" of the 01 pump assy on the 20 gal tank. That is where I will be tying in the 01 lines but I will have to bend them appropriately. Then comes the evap canister. Once I will get more time I will get it worked out. Hopefully!