[MCB Matt]

Quick fact that some may not know...

Dakota digital makes a Module called the BIM 01. This module plugs into the main brain that runs the VHX or Digital dash systems and will pull the dash data from the OBDII port.

So most any Fuel Injected motor you may be running probably has the OBDII port which will send out speed, tach, Oil, and Temp signals... This will make it so that you don;t have to install sensors for these signals! This will make the install much easier and cleaner! You will already be connecting power to the brain, that's where it will get your "volts" reading to display and your stock fuel level sender wire will go to the main brain too...

For those who have used the BIM 01, you know how clean and easy this makes a dash install with the VHX!!

Here is a link to the module for a much longer and detailed description of what it does: http://www.dakotadigital.com/index.c...rod/prd752.htm

Thanks
Matt