Re: broken trans modulator bolt
If it's a th350 worst case you have to pull the transfer case to get clearance to drill it. If it's a th400 you should be able to unbolt front drive shaft and the cross member and lower the Trans enough to clear to drill just don't break your distributor. Or if the bolt is broken flush you can put a 5/16 nut over the broken bolt and weld the center so it welds to the damaged bolt and then the heat will help break it free.
__________________
1985 1500 454, 4l80e, 12 bolt, 5/6 drop, 20s
|