Install the New TV Valve in the Valve Body Bore with BOTH return Springs.
Push the Valve down a little & Install the Roll Pin.
Check TV Plunger Bushing for wear, Move the Plunger Valve through the Bushing & Check for wear buy rocking the Valve in several locations. Keep in mind this is a High Wear item, If worn use this
http://www.sonnax.com/parts/2512.
Install Red TransGo TV Spring into Plunger Bushing.
Insert TransGo Spacer into Spring.
Install Plunger Assembly & TV Spring into Valve Body Bore.
Install Roll Pin.