View Single Post
Old 10-06-2014, 02:13 PM   #1
MCB Matt
Senior Member
 
MCB Matt's Avatar
 
Join Date: Aug 2014
Location: Benicia, Ca
Posts: 4,680
Classic Dash Panels With or Without Gauges and Harness kits - Direct Bolt - In

This is another TOP seller here at MCB and we have carried the line almost 10 years now!!!

Applications for 60-94 Chevy and 67-94 GMC are available.

All Dashes available alone of with gauges, harness, LED's, Electric speedo senders, ect.. It's best to PM or call for a quick, easy run through!

Dash colors are: Black textured finish, Brushed Aluminum look (smooth finish, great choice if you want to paint it and not have texture) and Carbon Fiber look (smooth finish, also good to paint if wanted)

We offer EVERY Autometer gauge they make

If you are running a stock setup now with the mechanical speedo, no worries, if you choose a new gauge setup with electric speedo, we have an adapter that screws to the side of the tranny where the cable went adn it converts the signal to electric!!! OR..... We also offer a GPS speedo sender which is what most guys are running now, it updates 10x per second and it never needs any re-programming.... Plug it into the speedo and forget it!

They are a very nice alternative for the guys who don't want the modern look of the Dakota digital VHX and don't want to just stick some gauges in the stock carrier!

With our prices you are paying less for the Autometer gauges than you would from the discount online speed shops!

The Electric gauge kits include a Plug - and - Play harness that plugs into your factory dash harness and pigtails out your signal wires....

These wires will be labled making install VERY simple..

We also include LED's for your turn signals (green), High beam (blue) and brake warning (red). The holes for the LED's are not drilled so you can choose your location and if you even want to run them.

The gauge holes are pre-drilled so they are perfectly straight and lined up as they should be.

The gauges come in their factory Autometer boxes with all hardware, instructions, senders, ect and you may place them in whatever configuration you wish.

60-63 Black with Ultra-Lite


64-66 Brushed with Cobalt


67-72 Carbon Fiber with Phantom


73-83 Black with Phantom II


84-87 Brushed Aluminum with Carbon Fiber Gauges


88-94 Black
__________________
MCB - Matt's Classic Bowties
5360 Gateway Plaza Dr.
Benicia, Ca. 94510
925-828-5555

www.mcbparts.com
Email: forums@mcbparts.com

Like us on Facebook for exclusive offers, info and chat: www.facebook.com/mcbparts

Hours: Monday to Friday 8am - 4pm Pacific
We ALWAYS enjoy talking to our customers!
We have a full time staff to answer ALL Questions, Tech Support or Order Status Tracking!
MCB Matt is offline   Reply With Quote