|
Re: 1952 Chevy Vette Roadmaster LT1 Farm Truck Build
Forgot to mention. I was measuring my frame up for square diagonally corner to corner and I'm a tad under 1/8" out. But if I measure diagonally from a rear corner to a rivet in the cross member mid way in the frame, I'm a good 1/2" out. I get the same distance to the rivet from the rear of the frame on both sides. The two rivets on each side are the same distance apart from each other. I also get the same distance to the rivets if measured from the front of the frame. It's got me confused.
Anybody got any idea's?
|