The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

67Dad · 10-15-2014, 12:50 AM

Yes, David and his brother Josh did an awesome job on it. Has won some local shows now that its nearly done. I had to jump in a do a repair on the brake switch...NOT FUN...but somewhat relaxing/rewarding none-the-less! (http://67-72chevytrucks.com/vboard/s...d.php?t=646192) Word to the wise--if you are rebuilding one and the brake switch appears to be OK as ours did, REPLACE IT ANYWAY when you get the steering column apart. It is a massive pain to replace the $7 part once it is all put back together. Tape and creative use of 1/4 drive w/ ujoing w/ extension on rachet helps.

10-15-2014, 12:50 AM	#893
67Dad Registered User Join Date: Mar 2010 Location: houston texas Posts: 84	Re: Project: 1967 C10 Small Window Yes, David and his brother Josh did an awesome job on it. Has won some local shows now that its nearly done. I had to jump in a do a repair on the brake switch...NOT FUN...but somewhat relaxing/rewarding none-the-less! (http://67-72chevytrucks.com/vboard/s...d.php?t=646192) Word to the wise--if you are rebuilding one and the brake switch appears to be OK as ours did, REPLACE IT ANYWAY when you get the steering column apart. It is a massive pain to replace the $7 part once it is all put back together. Tape and creative use of 1/4 drive w/ ujoing w/ extension on rachet helps. __________________ Mark 57 Austin Healey 3000 (sold many moons ago, unfortunately) 67 C10 (in progress, son's) w/ 1993 350 SBC, '96 Vortec heads (custom polished ports), EPS Performer intake, Holley carb, cam, MSD ignition 93 C4 Corvette (mostly done, son's)