[99 to Life]

10-20 mon Didn't get as much work in this weekend. Had to do alot of weatherizing. Anyway, jumped back onto the frame to button some things up. Should have cab on next weekend. Long over due! I got rotors, redid some air line location up front, still not final. Got exhaust on. Driverside is a real pain because the header comes down so much farther than the pass side. I just have some clamps on them as opposed to getting stainless wire to weld it on. I like the fact of removing things in pieces if need be. Still need to run some hangers.

Got rad brace back on, got to get rad hoses for final fit. Started the long overdue shock brackets, hoping to get that done next weekend.

I got bear claws in, I'll get to them and some final paint after I get more done with the drivetrain. I need a driveshaft and to hook up pedals and steering. Ran fuel and brake line. just need to button them up. I got stainless brake hoses for front and real, running all copper nickel line. Fuel is all aluminum with rubber ends. Still have to get sending unit for tank.

ordered up some nice calipers, need brake MC and clutch MC still.