The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

67GMCkid · 10-27-2014, 11:46 AM

Chevy or GMC panels are the same.
Tallest kick panel I found was from Jim Carter Truck parts, The down fall was that the floor pan I used was from Key parts and was contoured to match the their kick panel, so I cut the contour of the key parts kick panel and welded it on the Jim carter panel..

The Jim Carter Panel ends 3" from the bottom edge of the dash

10-27-2014, 11:46 AM	#2
67GMCkid Registered User Join Date: Jun 2012 Location: Etters Pa Posts: 197	Re: Differences Chevy Vs. GMC Chevy or GMC panels are the same. Tallest kick panel I found was from Jim Carter Truck parts, The down fall was that the floor pan I used was from Key parts and was contoured to match the their kick panel, so I cut the contour of the key parts kick panel and welded it on the Jim carter panel.. The Jim Carter Panel ends 3" from the bottom edge of the dash Last edited by 67GMCkid; 10-27-2014 at 11:55 AM.